How To Dry Wet Carpet Fast? (2023 Updated)

Keeping your carpet dry is essential to maintain its fresh look and durability. Have you returned to your home and noticed a leak? Or accidentally spill your coffee on the carpet? 

Well, It is challenging to dry your carpet fast and keep it moisture-free after a major water mishap in the home.

The good news is that even if your carpet has been wet through, there are techniques to remove the moisture with a little effort.

It is crucial to dry your carpet immediately to avoid unpleasant stains and stop the spread of mold. When handling wet carpets, there are several steps to take, and time is of the essence if you want to avoid water damage.

Our simple guide will show you how to dry wet carpets fast, saving you from mold, mildew, and soaking wet socks.

Things To Consider Before Drying Your Wet Carpet

Drying out the carpet first time is the easiest and most cost-effective option. It’s important to dry your carpet as soon as possible after a leak or water damage; you must take the following steps fastly.

  • Fix the Leak: Before you dry your carpet, you’ll need to identify and fix the leakage. Before initiating the drying process, you must correct the source of the leak, whether it is a broken pipe, a leaky roof, or anything else, to prevent additional damage to the carpet.
  • Clear the Room: Having furniture and other objects on a damp carpet prevents them from drying properly. Take everything off the carpet and put it somewhere clean and dry.
  • Avoid walking on Wet Carpet: Walking on a damp carpet not only tracks in the dirt but also wears it down because of its brittle condition. Any furniture or other items that might necessitate returning to the room while the carpet is drying should be removed beforehand.

What You Will Need to Prepare?

The way you dry your carpet will depend on what happened or how bad the water damage was. Remove the damp little carpet or rug and hang it up to dry. If it’s too big to remove, you’ll have to dry it with a shop vac.

A filter is a must-have. Sponges also work well. Avoid using a paper filter since it will eventually break down and cause your vacuum to get jammed. These are items you probably already have on hand.

Compile the following items:

  • Safety items, including gloves and a mask
  • A covered place to work, ideally a garage, with good ventilation and low humidity
  • Dehumidifiers and electric fans may help.
  • A block or hand instrument
  • A portable, cordless, lightweight, and compact wet vacuum cleaner
  • Super-absorbent, ultra-luxurious, and very plush microfiber towels
  • Items that may soak up water, such as damp rags, baking soda, kitty litter, or dry rice
  • A brush with very gentle bristles

Tips On How To Dry Your Carpet Fast?

1. Clear Away All Of The Furniture On The Carpet

The first step in drying is to remove everything from the afflicted area. Moisture might be trapped if the furniture is left out. In addition, you could have to raise the carpet, in which case you’ll have to remove everything off the floor.

You should immediately remove the furniture if you care about the floor under the furniture or the furniture itself. For quick results, enlist the aid of a friend or family member.

2. Dry Up Excessive Moisture

Water that has had time to soak into the carpet’s fibers will be more difficult to extract, so it’s best to get rid of it as quickly as possible.

Towels help dry off the damp carpet. To remove a stain, lay a towel over it, exert pressure, and then change the wet towel with a dry one.

Also, a wet vacuum might be useful. These vacuums can pick up both dry and wet debris without becoming clogged up.

Never use a standard vacuum on liquids since doing so might cause damage. Both the towels and the wet vacuum will not be able to fully dry the carpet. 

3. Let The Carpet Air Out

The underside of the carpet has to be checked. You must first dry the damp floor underneath the carpet; fixing the floor is more difficult than replacing the carpet.

The carpet will dry much more quickly if it is totally removed and spread to dry in the sun. It’s an effort, yet necessary to keep your carpet in good condition.

Of course, that’s not a simple task, and it isn’t always possible. The good news is that you may hasten the drying of your carpet by using the following measures:

  • Make it cooler by opening up the windows. Blow some fresh air on it to eliminate mustiness and speed up the carpet’s drying.
  • On a muggy day, you may discover that operating a fan is more effective than opening a window.
  • To combat the chill, you should either activate the central heating system or utilize a space heater.
  • Install a dehumidifier in the room to soak up extra moisture in the air.

4. Replace Carpets Padding

In most instances, if your carpet has already been flooded or wet with water, your carpet padding will be destroyed.

The primary carpet must be changed, so mold and wear don’t spread. Placing padding on your carpet can make it more comfortable to walk on.

5. Try Steam Cleaning

When a carpet has been soaked or flooded, steam cleaning is the best method for removing odors and germs and restoring cleanliness.

Cleaning carpets may be done by the homeowner or with the help of a professional provider.

The high heat of the steam kills toxic substances, and the vacuum action of a steam cleaner removes the mold spores that have been killed.

6. Patience Is Key

You may be surprised to learn how much moisture a carpet and pad can store.

Don’t turn off the fans when using a humidifier or heater. If it is pleasant outdoors, opening the windows might be beneficial.

You may feel like the carpet and pad are dry at some point. Don’t give in to the urge to save money and switch off the dryers. Large carpets and pads often take three days of drying time.

How To Dry Wet Carpet Without Vacuum?

Here are some things you can do to accelerate the air-drying process and minimize any damage to your carpet if you do not have access to a wet vacuum.

Air-drying success depends on how much air is passing over the carpet. The more air circulation you receive, the quicker the carpet will dry.

1- Fans

 The most effective fans are those mounted to the ceiling, although tabletop or portable box fans will also do the job.

2- Sun Drying

Sun drying the carpet is an excellent alternative to vacuuming, particularly in the summertime, for small mats used as floor coverings for decorative reasons. Easy-peasy sun-drying instructions are as follows:

  • After a spill or leaking pipe, blot the area with paper towels to absorb moisture.
  • After that, move the rug to a dry outside area and expose it to direct sunshine by spreading it out or hanging it up. If feasible, experts suggest placing the wet carpet on a rooftop or other open, shade-free area.

Due to the antibacterial properties of the sun’s UV rays, drying in the sun is an efficient procedure that ensures no mold. Sunlight drains moisture from carpets without harming the carpet’s fragile fibers, extending the carpet’s life.

3- Dehumidifiers

As dehumidifiers evaporate moisture from the air, they pair well with fans. The carpet may soak up more moisture from the air if the humidity is lower. The carpet in a standard room may be dried with a dehumidifier in about 12 hours.

4- Heaters

When getting a carpet dry, hot air wins hands over the cold. For the greatest results, you should combine a heater with a dehumidifier to prevent all the evaporated water from going straight into the air.

How To Dry Carpet With Baking Soda?

Baking soda is so versatile that it may be safely referred to as an all-purpose powder.

In addition to its qualities as a disinfectant and odor remover, it also does a fantastic job of speeding up drying a moist carpet. Since it can soak up liquids quickly, you won’t have to wait long for your carpet to dry.

Bicarbonate of soda helps eliminate musty odors left behind by damp carpets by absorbing excess water deeply into the carpet’s fibers. It will be considerably more difficult to complete this stage if you use the soda before you have absorbed water from the carpet.

After the damaged area has dried to the point where it is only moist and not dripping wet, bicarbonate of soda should be generously sprinkled over it, let to sit for an hour or two, and then vacuumed up. You may just pick up the soda and throw it away once it has absorbed moisture.

You can quickly and cheaply dry a small area of carpet using this approach. Unfortunately, you may require a lot of soda if your carpet covers a large area and has been soaked by an interior flood or leak.

How Long Does It Take to Dry a Carpet?

There is no simple answer to how long it takes. It depends on its size, the amount of water it was exposed to, and the drying apparatus at your disposal.

Minor spills may be cleaned up in an hour or two, but a saturated carpet might take up to a week to dry.

Carpets made from synthetic fibers like nylon dry far more quickly than those made from natural materials like cotton, and they also reduce the likelihood of mold formation.

It will take more time to dry your home after a flood or major leak. Even with everything is done to dry the carpet, it may take three days. However, if the carpet is still damp after 72 hours, you should seek expert assistance.

Can You Dry The Carpet With A Hair Dryer?

Yes, You can use to dry your carpet using a Hair dryer.

Hair dryers are multipurpose appliances that may be used for more than simply drying hair. Drying your carpet with a hair dryer is an option. However, you need to watch the temperature of the hair dryer, so it doesn’t burn the carpet.

If you want to avoid wrinkles in the carpet’s rubber backing, drying it at a low temperature is the way to go. Drying carpets in a concentrated area may cause damage, so it’s best to keep the dryer at a safe distance.

How To Prevent Carpet Damage?

Mold growth is a significant issue for wet carpets. It’s unpleasant to look at or smell, but it may also aggravate breathing problems in young children, the aged, and those with other health difficulties.

Another difficulty is that you may not notice it’s present in porous materials like carpet unless it’s too late and your carpet is destroyed.

Here are five keys steps to prevent your carpet damage:

  1. Get rid of the water Asap- Mold may grow in a moist, warm environment, but it requires time to fully develop. Mold may grow on your carpet in as little as 24 hours if all the water isn’t drained.
  2. Make sure it’s completely dry- Time is essential when drying it out as it is while removing the water. You should leave fans running continuously for at least a week to offer your carpet the greatest chance of survival.
  3. Use a dehumidifier- To make the air feel more refreshing, use a dehumidifier to eliminate the excess moisture in the environment. It helps the drying process along and reduces the potential for mold formation.
  4. Replace carpet backing if necessary- If you’re unsure whether or not to keep the carpet you have, it’s best to toss it and get a new one instead of dealing with the effort of removing the padding.
  5. Steam clean your carpet- You have either replaced the carpet’s backing or verified that it is in good condition. If this is the scenario, a steam cleaning of the carpet is the best option.

It effectively deodorizes and disinfects the region, so your carpet won’t continue to support the growth of potentially dangerous mold spores.


Restoring the original aesthetic look of a carpet takes the correct techniques, products and expert tricks after the water damage.

The sooner you get rid of the moisture and dry everything out, the better off your home will be, both in terms of safety and your budget for fixing the damage.

Moreover, huge carpets need rapid drying times. If you have tried drying it with soaking clothes and a dehumidifier and there is dampness present, then the best option to fix water damage to carpeting is to hire a group of professionals.

Don’t hesitate to ask for assistance if you find that you’re struggling to complete the task at hand. If you don’t, you’ll have to pay to replace the carpet and walls.


How do you dry your carpet when it’s wet?

To clean your carpet, put a thick layer of towels (ideally microfiber) over it and pat them down to soak up as much water as possible. Towels should be changed as they get soaked so the cycle may continue. Make careful to blot for water and relocate any furniture that could be in the way throughout this process.

How long does the carpet require to dry?

Fabrics from synthetic materials like polyester and nylon dry significantly quicker than those made from natural elements like wool. It takes at least 24 hours for an all-wool carpet to dry, even though a polyester one could just need 6 to 12 hours.

Leave a Comment