How To Raise he Height Of A Dining Table?

In this article we will discuss that how you can rise the height of your dining table?

You can raise your dining table height by attaching Extenders, Bun Feet, PVC pipes, Sled Bases or the best change the legs of the table. It is easier than ever.

Let’s take a look at all the ways you can raise the height of a dining table. But first, you have to take some measurements for better results of the final look. 

How To Raise he Height Of A Dining Table?

How To Raise he Height Of A Dining Table

1- Measure The Height Of The Dining Table

You can measure its height with a measuring tape. After noting it, you must decide the proper size and calculate how much height you want to increase. You should also be aware of the standard height of dining tables.

It will tell you which methods you can use to raise the height of our dining table. It is important to note that every technique will not work in every situation. However, you can increase it by selecting a suitable option.

You can raise the height by two to three inches as needed. It will help you manage with more height, but you will not enjoy your meals if you bend your neck down for an extended time.

2- Add Flanges or Supports

increase the height of dining table

Flanges are simple metallic structures used to increase strength and spread the weight across multiple sides. You can extend your table by 3 to 4 inches. The holes must be drilled in the same manner as the flange holes.

Nails and screws can be inserted into the table’s leg holes. You can weld metallic legs to the legs of these tables if you use them.

Flanges don’t always look good on dining tables and give your furniture an odd look. In that case, different kinds of support are available in the market. You can buy them for the dining table and place them under the table’s legs.

Depending on the thickness of the dining table legs, you can add any support beneath them. You can use this option to gain a few inches in height.

3- Use Extensions According to Table Material

The best solution is to use an extension that matches the material of the dining table extension so that it gives a natural look and doesn’t look odd. As extensions come with different heights, you might need to use multiple extensions on one leg. It depends on the height of the table you want to raise. 

Before drilling holes in the wood, you should check its condition. For example, it could be swollen, and as a result, it will not hold the extensions in place. If it has swollen, it will no longer have the adhesive power to hold another piece of the wooden extension in place.

You can cut the leg to the point where it is not in a better position. Then, to keep it equal to the others, you can attach a new piece of wood of that size. After you’ve fixed a new table, you should double-check its balance.

Because the extensions are all the same size, you can adjust them before attaching them. After you’ve resolved this issue, you’ll need to drill the holes in the legs.

You can fix the fasteners and screws to help you fix it. In addition, you can specify that the products you use should perform the function for which you installed them.

To secure it in the legs, use a hammer or a screwdriver. Then, you can give it a shot by putting some weight on it. It will allow you to test out all of the functions of the wooden extensions.

The glue can be applied to the small gap between the legs and extensions. However, it will not allow them to separate from each other. You will have no problems if you follow all of these guidelines.

After completing the fixation process, you will paint these supports the same color as the legs. If you leave them untreated, the legs will appear in two colors. There will be numerous negative consequences as it will deteriorate the beauty of your bedroom.

4- Change The Legs

The dining table’s legs can be changed entirely. If you believe that any support will not function properly, you must remove its older legs and replace them with new ones. In addition, you can replace its legs with more giant legs than the older legs. You can use this method when you need to add more than 12 inches to your table.

While changing the legs, you must take specific steps:

  1. Use the woodcutter from the top to remove the older ones.
  2. The holes in the table frame must be drilled with a drill machine.
  3. You must purchase new legs of the same shape to be repaired.

There is no need to modify its shape because the frame has a structure that corresponds to the shape of the leg.

You must add fasteners and glue to the top of the leg and hammer it in place. You’ll do the same thing for all four legs.

If you have all the necessary tools, changing the legs does not require much expertise. If you keep practicing, you will have no trouble implementing it.

5- Use PVC Pipe

If you want to go with a cheaper solution and keep it a casual look, PVC pipe is the best solution. To use PVC pipe, first of all, Purchase a 2-inch diameter PVC pipe from your local hardware store. Next, cut the PVC pipe into four equal pieces of the same height as the table you want to add. 

Turn your table on its side and attach the PVC pieces over each foot before carefully standing it up. The PVC pipe can vary according to the size of the PVC pipe, and handle it carefully. 

6- Use DIY Sled Bases for Dining Table

Sled bases are commonly used to provide stable support on chairs or anywhere else. Use them when you need them; when you don’t, remove them. You can easily make sled bases for your table from everyday materials and tools to lift it and save your back.

7- Use better alternative – Bun Feet for Dining Table

Bun feet are simple wooden extensions that come in a variety of shapes. You can put them under the dining tables’ feet. You can get them in a variety of shapes and sizes as needed.

If we can’t use another technique, there’s a ready-made wooden extension we can put under the table. When you buy some bun feet, they will come with screws or fasteners already installed. You can accomplish all of this by turning the table upside down. It will assist you in adjusting all of these things.

Bun Feet are far more convenient because you don’t have to drill holes in them, but you do have to drill holes in the legs. However, it will provide numerous benefits, such as increasing the height of the table and increasing its beauty.

These surfaces only require glue to be attached. You can also paint it with and match it to the table’s legs original color.

8- Add Castors

When castors are added to a table, the height is automatically increased by 1 or 2 inches. It also provides mobility to the table. 

Purchase castors from your local hardware store and install them according to the instructions. They are available in a variety of styles and colors.

9- Lower the height of Dining Chairs

dining chair

Instead of raising the table, it is better to shorten the chairs. However, it requires more workforce and time but is another way to think of it. 

It would help if you made a clear mark on the legs where you want to cut them. Then, after cutting each leg with a circular or hand saw, sand the base of each leg.

Step by Step Guide on how to add an extension on the dining table

Most of the methods involve an additional piece to the dining table that can raise the height. Here we have written primary and general guidelines on how you can raise the height of the dining table. 

Step 1: Cut and Match

Determine how much length you require and use a miter saw to cut extensions from second-hand or online-ordered legs. You may be able to cut all four extensions from a single leg depending on how they match.

Step 2: Drilling and Doweling

Generally, it would help if you drilled 3/4-inch matching holes in the extensions at least 3 inches deep with a drill press and 3/4-inch sawtooth bit. Turn your table over and remove any hardware from the bottom of the legs. Drill matching holes in the bottoms of the legs with a drill/driver fitted with a sawtooth bit.

Step 3: Apply Glue and Press 

Please fill all the holes with wood glue and press them tightly before making it pos. In each of the four extensions, insert dowels. Insert the dowels’ extended ends into the holes in the legs. 

Pound them into the legs with a hammer. Reposition the table. Allow the glue to dry for at least 24 hours.

Use Screws for Dowels

Dowel screws could be used instead of wooden dowels. Dowel screws are not as strong as wooden dowels, but they are more convenient and straightforward to use. Dowel screws look similar to bolts and have pointed threads on both ends.

Dowel screws should be installed—drill matching holes in your extensions and the table legs’ bottoms. Screw the dowel screw halfway into the bottom of the leg with locking pliers. Screw the extension to the exposed end of the table leg’s dowel screw.

Install Removable Extension

Depending on your intentions (for example, a worktable), you may want a sturdier extension. The solution is four-by-four posts. It won’t look nice, but it will support an elephant, and the legs are removable.

During this process, make sure not to overtighten the bolts as it will break the legs from inside. You might not notice it from outside, but the legs will start to swell and eventually break later on. 

Best Height For Table and Chair Guide

Best Height For Table and Chair Guide

Most people may not answer in inches when asked how tall a dining table is. While there is a standard table size and height, there are also designs that intentionally deviate from that.

Table heights that are commonly used include:

  • The counter height ranges from 34 to 36 inches. Countertops used as tables are tall enough to serve as an additional prep area before dinner.
  • The tables at bar height are 42 inches tall. Sitting at this height keeps most people about the same height as standing.
  • Standard tables (round, oval, square, or rectangular) are 28 to 30 inches tall. These are the most commonly used because the height is suitable for everyone – children, adults, and even people in wheelchairs can sit and reach comfortably at a standard table.

How To Find The Best Height Dining Table For Your Family

Finding the best height dining table is easy. You need to take care of a few things before buying a new dining table. Here are the points that you need to take care of:

  • If you have family members with taller height, counter height tables will give them more legroom.
  • The bar table may be what you’re looking for if you frequently host and enjoy socializing at a more casual dinner.
  • When used in a small space, counter height and bar tables make the room appear less crowded and more open.
  • Use a standard table for a more formal and decent look. Counter and bar tables are more casual options. Floor sitting, on the other hand, is the most casual option if you like to keep things simple and you’re on a budget
  • People and families of shorter stature (including families with children) will feel more at ease at the lower, standard table.

Conclusion

In this article, we discussed how you could increase the height of your dining table. There are various ways to do this without any complicated process. We have listed simple and easy methods that can increase the height of your dining table. 

You can use any methods listed above that you think is the best and do not give an odd look to your furniture. 

Leave a Comment