How To Paint Beer Pong Table: 5 Easy Steps!

Painting a beer pong table adds a sense of freshness and excitement, providing an elegant look regardless of whether you are playing. But most people don’t know how to paint a beer pong table or whether they can do it themselves.

In short, you can paint a beer pong table by yourself. It’s highly simple, and you just need painter’s tape, a spray can, newspaper, and some design to put on the table.

Don’t worry if you find it still confusing. I’ve shared a complete guide on how to paint a beer pong table, along with all the related facts and queries. So let’s get started.

Can You Paint A Beer Pong Table?

Yes. You can paint a beer pong table to grab the audience’s attention. Beer pong tables that are painted leave a pleasant impression on players and increase their confidence.

Using stencils or any objects you want, you can also add custom designs to your beer pong table. These designs will be the center of attention for the whole party.

Factors To Consider Before Painting The Beer Pong Table

The following things must be considered before painting the beer pong table:

1- Type Of Surface

This is the most important factor to be considered before painting because it will help you to get a more glossy or mate finish. Always consider what type of surface you are painting, whether an indoor or outdoor table.

If it’s an outdoor beer pong table, then make sure to sand and prime the table before painting. As a result, the paint will stick better and last longer.

2- Type Of Paint

It’s also an important factor to be considered. Always choose the paint keeping all the situations in mind. Like if you want a permanent paint job, then use enamel paint. Otherwise, for temporary paint, use acrylic paint.

I recommend you consider the glossy or matte finish. This is because a glossy finish will be more durable and easier to clean, but a matte finish will be more aesthetically pleasing.

3- Design

The design on the beer pong table should also be considered because the more attractive design grabs more attention from friends at a party.

You can use your skills or stencils to make a perfect design. Later in this article, I shared a complete guide on how you make a perfect design for your beer pong table.

4- Colors Choice

Colors choice also matters to make the table more attractive. You can either go with the traditional red cups and blue table or choose any colors.

After considering all these factors, you’re ready to paint your beer pong table.

How To Paint Beer Pong Table? Easy Steps!

How To Paint Beer Pong Table

You will need the following materials before beginning the procedure:

Materials Required

  • 1 bottle spray can
  •  Painters tape
  •  Newspaper or something to cover the ground
  •  A stencil to put the design (optional)
  •  Table to be painted

Follow this step-by-step guide to painting the beer pong table:

Step 1: Set Up Your WorkSpace

The first and foremost step of painting the beer pong table is setting up your workspace. This can be done by tapping off the area you will be painting and covering the ground with newspaper.

If you don’t know how to use painter’s tape in the right way, then follow these simple steps:

  1. Clean the surface. The surface should be dry, clean, and dust free so the tape sticks properly.
  2.  Apply the tape on the surface you want, pressing down as you go.
  3.  Now secure the tape firmly with a smooth edge like a credit card.
  4.  Wait for about 30-60 minutes before you start painting.

Step 2: Add A Design

This is an optional step, but I recommend this step to add more beauty to your beer pong table. Different designs can be added to beer pong tables. I used my art to make a chevron pattern.

You can also use stencils to make custom designs on your beer pong table. It all depends on you.

Step 3: Spray The Paint

After adding the design, spray the paint on your table and ensure you get all the sides evenly.

If you are a beginner and don’t know how to spray paint properly, then follow these steps:

  1. Shake the can of spray paint.
  2.  Apply a tack coat to the whole table.
  3.  Now apply several light coats (Clear coats) of paint, letting each dry.

Step 4: Let The Paint Dry

This is a very important step, and make sure to perform it with full care. After applying the paint, let it cure and dry for several hours.

Although the spray paint dries between 10-30 minutes, I recommend leaving it for 2 hours for better results.

Step 5: Remove The Painters Tape

In the end, remove the painter’s tape. It is easier to remove and doesn’t leave any adhesive behind. Also, it doesn’t remove anything from it.

To remove the painter’s tape, score along its edge with a putty knife or razor blade. By doing so, the paint won’t pull up with the tape and won’t crack along with the paint line.

Bonus Tip For Painting The Beer Pong Table

Tip For Painting The Beer Pong Table

If you are painting an outdoor beer pong table, then it is recommended to use a primer before painting. This is because it will help the paint to stick better and last longer.

For painting an outdoor beer pong table, follow these steps:

  1. Clean the surface and apply primer to the table.
  2.  Shake the can of spray paint.
  3.  Apply the tack coat to the table.
  4.  Then apply several light coats (Clear coats) of paint and let them dry.
  5.  Leave the paint for about 1-2 hours.

Reasons To Paint The Beer Pong Table

Painting a beer pong table is an easy way to give your table new life and adds a pop of color to your room.

Below are some major reasons why you should paint your beer pong table:

  • Painting the beer pong table adds color and beauty to your room.
  •  It grabs the attention of the whole party.
  •  To avoid spills and water, you must paint a beer pong table.
  •  It prevents cracks and adds durability to your table.
  •  The colored table gives players more confidence than a simple beer pong table.
  •  Painting the beer pong table decreases the chances of mild mildew growing. (In the case of the wooden table)
  •  It hides stains and cracks from your beer pong table.

Common Mistakes While Painting Beer Pong Table

1- Not Using Enough Primer

People make this most common mistake while painting an outdoor beer pong table. Remember, if you skip priming, you risk peeling paint, especially in humid conditions.

If you apply too little primer, the paint won’t bond properly to the table surface. This can cause peeling and flaking after a little time.

If you don’t apply the primer correctly, cleaning may be more difficult after a few months. The paint may also crack and wear off over time.

2- Using The Wrong Primer

It is also a big mistake that people make. They use a normal primer instead of the high-quality primer.

I recommend using the Rust-Oleum brush primer on the beer pong table. You can buy from here:

Rust-Oleum 7780730 Stops Rust Clean

Rust-Oleum 7798502 Stops Rust

3- Not Sanding The Carbon Fiber Before Painting

If you don’t sand an outdoor beer pong table before painting, the applied paint could peel off.

It is important to sand the surface before painting to ensure a smooth surface. Although it is not necessary for the outdoor beer pong table

4- Applying Too-Thick Paint

If you apply too thick paint, there may be ridges, lumpiness, or an orange peel finish. Runs and sags can be caused by thick paint.

To prevent cracking, apply thin coats and allow each coat to dry before applying the next.

5- Failing To Clear Coat

A clear coat provides your paint with a detailed and shiny finish. Additionally, it prolongs the life and shine of your paint. It is always a good idea to apply a clear coat after painting.

6- Not Drying The Paint

Lastly, most people don’t let the paint dry and wash the table surface before drying. This act will ruin all your hard work. So, before washing and waxing the surface, ensure it is completely dry.

What Is The Best Kind Of Spray Paint To Use On Plastic?

Choosing the best spray paint for plastic is important because it will adhere to plastics and provide a shiny look to your beer pong table.

To choose the best spray paint for plastic, consider whether your table is outdoors or indoors. Also, use paints that are specifically formulated to adhere to plastics.

I have listed some best spray paints for plastics that will adhere to your beer pong table. You can also buy by clicking on them:

Rust-Oleum 211339 Specialty Spray Paint

Krylon K02753007 Fusion All-In-One Spray Paint

How To Design A Beer Pong Table?

Designing a beer pong table can be considered to grab more attention from friends at a party.

You can use your skills or stencils to make a perfect design.

Another idea is to ask your guests, friends, or party members to decorate the table over time. Start this fun activity by drawing thick markers all over the surface.

Is It Important To Sand A Beer Pong Table Before Painting?

No, it’s not necessary for the indoor beer pong table. But for an outdoor table, I would recommend sanding because it will allow the paint to adhere and make it long-lasting.

Also, it prevents the paint from cracking and peeling off. So, always consider sanding your beer pong table if it has to be placed outdoors.

You can use fine-grit sandpaper to prevent any damage to the table surface. If you want high-quality sandpaper, then choose from the below-mentioned varieties:

How To Seal A Pong Table?

Sealing a beer pong table is essential to protect its paint from oil spills, water, etc. Sealing the pong table can be done by using an acrylic varnish.

Make sure to buy an acrylic varnish made specifically for painting tables. If you want the best acrylic varnish, then choose from the below-mentioned varieties:

Golden Archival Varnish Gloss 

Liquitex Professional Gloss Varnish

Benefits Of Painting The Beer Pong Table

Painting a beer pong table has numerous benefits. Some of these are listed below:

  • Painting hides cracks and saves the table from looking weird.
  •  It provides a long-lasting life to your table.
  •  Painting the table becomes more durable and can withstand humid conditions.
  •  It prevents oil spills and water from ruining your table.
  •  With painting, your table will be unique and the center of attention for the entire party.

FAQs

What Is A Tack Coat In Painting?

A tack coat is applied after the primer coat. It forms an adhesive bond between the tack coat and the next layer of coating. A tack coat is important to prevent slippage.

What Can I Put On My Painted Pong Table?

You can use an acrylic varnish to seal your pong table. This will protect your table from oil spills and water.

How Do You Waterproof A Beer Pong Table?

You can look for waterproofing sealants, saints, or paints. Apply their thin coat to the surface of your table and let them dry.

How To Paint A Beer Pong Table?

To paint the beer pong table, follow these steps:
1- Clean the surface and apply painter’s tape.
2- Use some design if you want.
3- Spray the paint properly on the whole surface.
4- Let it dry for a few hours.

Final Words

The article concluded that you just need painter’s tape, a spray can, newspaper, and some design to paint the beer pong table.

Hopefully, now you should know how to paint a beer pong table and all the queries related to its painting.

Related Posts!

Leave a Comment